The use and precautions of the Seed Cleaning Machine

The series of Seed Cleaning Machine can clean the various grains and crops (such as wheat, corn, beans and other crops) to achieve the purpose of cleaning seeds, and can also be used for commercial grains. It can also be used as a classifier.

The Seed Cleaning Machine is suitable for seed companies at all levels, farms, and breeding departments, as well as for grain and oil processing, agricultural and sideline product processing, and purchasing departments.

Operation safety matters

(1) Before starting

①The operator who uses the machine for the first time, please read this manual carefully before turning it on, and pay attention to the safety signs everywhere;

②Check whether each fastening part is loose, and tighten if there is any;

③The work site should be level, and use the screw of the machine frame to adjust the frame to a horizontal position, adjust it to a suitable height, and the four feet are balanced;

④When the machine is empty, do not adjust the air inlet of the fan to the maximum to avoid burning the motor.

⑤When the fan is started, do not remove the protective net on the frame to prevent inhalation of foreign objects.

(2) At work

① Elevator hopper is strictly prohibited to feed easy entanglement and bulk impurities, etc.;

② When Elevator is working, it is strictly forbidden to reach the feeding port by hand;

③Do not stack heavy objects or stand people on the gravity table;

④ If the machine breaks down, it should be shut down for maintenance immediately, and it is strictly forbidden to remove the fault during operation;

⑤ When encountering a sudden power failure during operation, the power must be cut off in time to prevent the sudden start of the machine after a sudden power on, which may cause an accident.

(3) After shutdown

① Cut off the main power supply to prevent accidents.

② Before cutting off the power, ensure that the gravity table has a certain thickness of material to ensure that the best selection effect can be achieved in a short time after the next startup;

③ The machine must be cleaned if it is not used for a long time, and the machine should be placed in a dry environment.